Description
warranty service
logistics service

Overview

Official PN：781347-01

TB‑4330 is an exclusive front snap-on screw terminal breakout block designed for NI PXIe‑4330 and PXIe‑4331 simultaneous-sampling strain/Wheatstone bridge input modulesdownload.ni.com. It converts the rear dense 96-pin DIN connector of the strain module to independent 88-pin screw terminals, supporting direct wiring of quarter, half, full-bridge strain gauges and low-voltage analog signals. Built with mechanical keying interlock to prevent misinstallation on incompatible hardware, with trace resistance below 20 mΩ to preserve microstrain measurement precision. Accepts wire gauges up to 14 AWG, with integrated strain relief to secure cables against vibration loosening. Max rated signal voltage 10 V, low inter-channel crosstalk, fully compatible with NI‑DAQmx and LabVIEW, widely used for automotive chassis stress, aerospace composite fatigue and mechanical vibration strain testing.

Core Specifications

Compatible Hardware: PXIe‑4330, PXIe‑4331 8-channel simultaneous sampling strain bridge modulesdownload.ni.com
Interface Conversion: 96-pin DIN rear connector to front 88-position screw terminal array
Wiring Spec: Max wire gauge 14 AWG, internal circuit trace resistance <20 mΩ
Electrical Rating: Maximum signal voltage 10 V, low noise & low crosstalk for microstrain capture
Mechanical Design: Front snap mounting, anti-misplug mechanical key lock, total weight 548 g
Environmental Range: Operating temperature 0~55 ℃ indoor cabinet, anti-shock/vibration industrial grade
Software Support: Native NI‑DAQmx & LabVIEW compatibility, transparent strain bridge measurement workflow

Application Scenarios

Automotive powertrain & chassis structural strain testing, aerospace composite material fatigue monitoring, industrial equipment vibration deformation measurement, civil engineering load cell static/dynamic testing, university strain measurement teaching laboratories.

Standard Package Contents

TB-4330 strain terminal block, wiring specification sheet, quick installation guide, safety compliance datasheet.

1.Brand New Items: Comes with 3 Years Official Full Warranty

2. Used & Refurbished Items: Enjoy 2 Years Professional Warranty Service

3. Free Warranty Maintenance: All non‑human quality failures are covered for free repair and maintenance during the warranty period

4. Full Technical Support: Professional technical guidance and exclusive after‑sales repair services are provided for all warranty‑qualified products.

5.Strict Fault Verification: All product failures will be professionally inspected and confirmed to judge warranty eligibility accurately.

6. We strictly inspect damage reasons to confirm warranty eligibility.

• We ship out all orders within 3 business days after payment confirmed.

• Global fast shipping supported by FedEx and UPS Express Delivery.

• Real-time tracking number provided for every order, easy to track delivery status online.

• Every item will go through strict professional testing and full function inspection before shipment.

• We take detailed real photos for each product to confirm appearance, condition and accessories before delivery.

• Premium shockproof and anti-collision packaging to protect goods from damage during transit.

• Safe and smooth customs clearance, shorten delivery time.

• Complete accessories and intact packaging before shipping.

• Professional after-sales logistics support, we help solve all delivery and receiving problems.

• Fast global delivery, safe and reliable transportation guarantee.

PCIe S‑Series

NI S‑Series (61xx family) multifunction DAQ features true simultaneous‑sampling architecture with dedicated ADC per channel . Mostly PCI / PXI form‑factor, few native PCIe variants. It delivers near‑zero phase delay across channels, ideal for transient waveform capture, vibration, acoustic and other timing‑critical measurement tasks. Supported by NI‑DAQmx driver and compatible with LabVIEW, TestStand. Accessories are not interchangeable with X‑Series

PXIe X‑Series

NI PXIe X‑Series are high‑performance multifunction DAQ modules on PXIe bus. Built with STC3 timing engine, they integrate analog input, analog output, bidirectional DIO and four 32‑bit counter‑timers. Leverage PXIe high‑speed backplane for hardware triggering, retriggerable measurements and multi‑module synchronization with VHDCI‑68 connector. Fully compatible with NI‑DAQmx driver, supporting LabVIEW, TestStand, Python, C/C++ and C#. Widely applied for data acquisition, automated ATE and hardware‑in‑the‑loop test systems

NI‑9213 C‑Series Module

NI‑9213 is a high‑density C‑Series thermocouple input module for CompactDAQ and CompactRIO systems. It offers 16‑channel, 24‑bit thermocouple measurement with up to 75 S/s per‑channel sampling rate. Integrated cold‑junction compensation, open‑thermocouple detection and anti‑aliasing filters. 250 Vrms channel‑to‑earth isolation with NIST‑traceable calibration, spring‑terminal connector supporting all standard thermocouple types. Mix‑and‑match with other C‑Series modules, widely used for multi‑channel temperature monitoring, environmental chamber and thermal‑cycle testing

PXIe‑1065 chassis

PXIe‑1065 is NI high‑performance 18‑slot PXIe chassis, supporting mixed PXI and PXIe modules. It features 9 PXI slots, 4 hybrid slots, 3 PXIe peripheral slots and one PXIe system timing slotNI. High‑bandwidth backplane delivers low‑jitter 10 MHz /100 MHz reference clocks, supporting PXIe star trigger and multi‑module synchronization. Field‑replaceable modular power supply shuttle, temperature‑controlled variable‑speed fans, up to 30 W per‑slot cooling and rack‑mount capability. Widely deployed for multi‑channel ATE systems, hardware‑in‑the‑loop, signal acquisition and simulation test benches

NI TB-4330 Front Screw Terminal Block for PXIe‑4330 / PXIe‑4331 Strain Bridge Module PN:781347-01

Client Testimonials

A complete set of NI equipment that can operate completely, I am very grateful.

I am satisfied that NIST calibration is possible

I really like this company for being able to deliver in a timely manner so that my laboratory can continue testing,

Description

warranty service

logistics service

Overview

Core Specifications

Application Scenarios

Standard Package Contents

PCIe S‑Series

PCIe S‑Series

PXIe X‑Series

NI‑9213 C‑Series Module

PXIe‑1065 chassis